InfiniteCommercial Roofing Request an assessment

Infinite Commercial Roofing

Extend the Life of Your Commercial Roof.

Commercial roof restoration and protective systems designed to reduce disruption and protect your investment.

Request a roof assessment

What we do

Commercial roofing. Nothing else.

We specialize in low-slope and flat commercial roofing systems designed to protect your building and extend the service life of your existing roof. We serve building owners and property managers across Tennessee.

  • Warehouses
  • Manufacturing facilities
  • Retail centers
  • Churches
  • Schools and institutions
  • Self-storage

Services

Systems for the roof you have

Our specialty

Metal Roof Restoration

We seal the seams, fasteners and rust on your existing metal roof, then finish it with a bright white reflective coating. There is no tear-off.

Conklin MR System See how it works
Fabric-reinforced system

Roof Coatings

A seamless acrylic coating with tough fabric embedded in it, applied over an aging membrane or built-up roof.

Flexion / Outpost TPO

Membrane Roofing

Single-ply sheets with welded seams, for roofs that are past restoring and need a new watertight surface.

Spray polyurethane foam

Spray Foam Roofing

Closed-cell foam that insulates and corrects poor drainage, sealed with a reflective finish coat.

All low-slope roofs

Repairs and Maintenance

Leak tracing, seam and flashing repairs, and scheduled checks that keep a sound roof in service longer.

Before you budget for a new roof

Replace your roof? Or restore it?

A leaking roof does not always need to be torn off. Many low-slope roofs can be restored in place, with less disruption to the building. It depends on what is under the surface.

Restoration may be an option when

  • The deck and structure are sound.
  • Leaks trace to seams, fasteners, flashings or penetrations.
  • Metal panels have surface rust but are not rusted through.
  • The membrane is weathered but still attached, and the insulation under it is mostly dry.

Replacement is more likely when

  • Insulation is saturated across large areas.
  • The deck is damaged or panels are rusted through.
  • The membrane is failing widely or coming loose.
  • The roof already has as many layers as code allows.

The only way to know is to get on the roof. Have it assessed before you assume a full replacement.

Request a roof assessment

Metal roof restoration

How a restoration goes

The Conklin MR System is a complete waterproofing system for metal roofs. Each layer has a job, and they go on in this order.

Before After

Illustration. Drag to compare a weathered panel roof with a finished restoration.

  1. Inspect and clean

    We walk the roof, mark the problem areas and clean the whole surface. Rust is treated first.

    Rust Off

  2. Prime

    The roof is primed with a rust-inhibiting metal primer so the coating bonds to sound steel.

    Metal Ready Universal

  3. Reinforce

    Seams and laps are reinforced with fabric set into the coating. Fasteners and penetrations are sealed.

    Spunflex fabric

  4. Topcoat

    The entire roof gets a highly reflective white finish coat, chosen for your building.

    Rapid Roof III / Benchmark / PUMA XL

The systems we install

Built with Conklin roofing systems

Infinite Commercial Roofing is an independent contractor. We install roofing systems made by Conklin, which has formulated acrylic roof coatings since 1977.

What that means for your building

  • Leaks stopped at the sourceSeams, fasteners and penetrations are sealed under one continuous system.
  • Lower cooling costsThe cool, white reflective surface improves energy efficiency.
  • Less disruptionRestoration systems go over the existing roof, which may eliminate tear-off and haul-away.
  • A longer service lifeThe system protects the roof you have from sun, wind, hail and rust.

Contact

Tell us about your roof

We will come out, assess the roof and tell you whether it can be restored.

Service area
Statewide across Tennessee